3/03 1180270 broadcast products 169 www.adc.com ?+1-952-938-8080 ?1-800-726-4266 fiber optic patch cords all patch cords undergo stringent testing for both insertion loss and return loss at the factory before shipment to ensure that only quality product is delivered to the customer. adc offers ultra physical contact polish on the sc, st , fc, and lc connector styles. typical insertion loss is 0.1 db. angled polish is available on the new lx.5 small form factor connector, sc, fc, and the e-2000 connector styles. angled polish should be used in applications that require better control of return loss. adc has tight tolerances regarding the rotation of the ferrule to maintain low insertion loss values. singlemode patch cord singlemode ordering number __ __ - __ - s - __ m cable option connector type*** length x length in meters fpc connector on both ends (patch cord) fpt connector on one end (pigtail) cable type 3 mm single m 2 mm single f 1.7 mm single 9 900 micron z 3 mm dual zip 2 2 mm dual zip t 1.7 mm dual zip leave blank *requires 900 micron or 1.7 mm cable. **one connector per end; requires zip cable. ***for hybrid patch cords, enter both connector types in this field, separate them with a slash mark and remove the s from the second connector. ordering example fpc2-spfc-10m: patch cord with ultra polish fc connectors on both ends, 2 mm dual zip cable, 10 meters in length with standard breakout length of 12" on both ends. fpc-spst/psc-s-10m: patch cord with st ultra polish connector on one end and sc ultra polish connector on the other end, 10 meters in length. spsc sc ultra polish spst st ultra polish spfc fc ultra polish apsc sc angled polish apfc fc angled polish alx5 lx.5 angled polish* ae2 e-2000 angled polish splc lc ultra polish* sdsc sc duplex** adlx lx.5 angled polish duplex*
|